| Min. Order: | 5 Set/Sets |
|---|---|
| Payment Terms: | T/T, WU |
| Place of Origin: | China (Mainland) |
| Means of Transport: | Ocean, Air |
| Production Capacity: | 1000sets/month |
| Packing: | Neutral Packaging |
| Delivery Date: | one week after payment |
| Brand Name: | Starway | Light Souces: | LEDs |
|---|---|---|---|
| Work voltage: | DC 12V / 24V | Material of lens: | PC |
| Flash Patterns: | 18 | Colors: | Amber, Red, Blue, White, Green |
| Type: | Traffic Signal | Electric Current: | <=1.2A |
LED362 Starway Warning super LED lighthead / Starway Police LED Dash deck light / Starway Emergency grill led lighthead
1. Summary
This Starway Warning Grill LED lighthead (LED362) is made of high power high brightness LED. It use microcomputer programming chip,and constant voltage circuit design,It has high brightness,low power loss, long life and so on the merits.It has a lot of kinds of flash pattern offer to choose and power off memory function.
It is suitable to install in automobile vehicle.
2.Features
1). Work voltage:DC12V/DC24V
2). G-3 LEDs with 6 bulbs
3). Life Span: 100,000
4). 18 flash patters to pick up and can flash two lightheads together for synchronization
5). Waterproof and shockproof
6). Perfect for interior and outer applications .
3. Specifiation
Work voltage | DC12V / DC24V |
Type | Traffic Signal |
Light Sources | LEDS(G-III) |
| Type | Traffic Signal |
Electric Current | <=1.2A |
| Bulb number | 6 |
Material of lens | PC |
Flash patterns | 18 |
Color | Red/Blue/Amber/Clear/Green |
4. Mounting
1). Position the unit in its proposed mounting location. Draw a pencil line onto the mounting surface along the top and bottom of the extrusion and a "centerline" centered between the two.
2). Two 1/4" holes are required to mount this unit. These holes may be located anywhere along the holes as far apart as possible. Mark the hole location onto the mounting surface.
3). Using a 1/4" drill bit, drill a hole in each of the areas scribed in the previous step.
4). Slide the 2 carriage bolts (installed in the rear of the bar) insert them into the mounting holes.
5). Secure the unit by threading the flat washer and elastic stop nut onto each bolt and tightening them firmly.
5.Wiring
See illustration diagram for wiring information
WARNING! All customer-supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and at the battery to carry the load. DO NOT USE CIRCUIT BREAKER SWITH THIS PRODUCT!
6.Operation
Note:
The Starway warning LED Grill lighthead (LED361) has no work, please check the main fuse.
Workshop:
Applications:
Police, Fire, The Automotive, Police, Fire, Motorcycle, Construction,Emergency Vehicle and School Bus Industries
Category: Grilles/Surface Mounts