18650 Battery Super Bright CREE LED Flashlight With 120 Lumen

SY3538A Super Bright CREE LED Flashlight with 120 Lumen

1. Features
1). Space grade T6 aluminum
2). Crown cap for a window punch
3). Waterproof
5). Rechargeable Lithium Ion battery can be recharged 500x(or 2- 123A batteries)
6). Integrated Circuit prevents overcharging
7). 50,000 hour bulb life
8). It issuitable for tactics, self-defense, searching, climbing and outdoor lighting and so on.
9). Tail cap switch tap switch toggles between 3 modes:
       High mode: 191 lumens, 3.5 hour run time
       Low mode: 10.6 lumens, 10 hour run time
       Flash mode: 191 lumens, 3.5 hour run time
10). Comes with car and home charger

3. Technical parameter

4. Installation methods

1). Battery installation method:turn end cap on ,Put the 18650 batteries positive upward into the cylinder ,and then turn end cap off (pay attention to the battery anode when putting the battery)(Image 1).

                                  Image 1

2). Lighting model transformation method:

2.1) Floodlighting mode: It is suitable to search\irradiate distant goal. 6 seconds after flashlight turned off, it is high -light mode when pressing the switch.

2.2) Dim-light mode: It is suitable for short-range lighting. After turning flashlight on, press the switch gently, it is complete to transform Dim-light mode.

2.3) flashing mode: It is suitable for sending out a distress signal\self-defense. Press the switch 2 times continuously after turning on the image 2

                      image 2

2.4) Locking mode: It is suitable for long time not using, put the flashlight on locking mode, to prevent mistakenly putting the switch on. It is complete to transform locking mode after end cap of flashlight is rotated counterclockwise 1-2 circles.

3).Charging method: To ensure that you can normally charge , please check if the flashlight works normally before charging.

3.1) Rotate counterclockwise grab handle, show the charger connector.(Image 3)
           
                                 image 3

3.2)The two plug foot for charger is inserted into 200v plug ,and the other end of charger is inserted charger connector, and then turn the flashlight on.(When the battery is charging ,the indicator light above the battery charger is red. it shows that the battery is full.) The time 18650 battery charging is 4 hours(Image 4).

                                 
                                  image 4

3.3) After the battery is full, pull the plug out , turn the handle until it is close to the connecting thread and it is able to use(Image 5).

                                               image 5

5) Matters for use need attention:

Thanks for choosing to use this product, in order to long use, those matters below need attention:

1). When using Floodlighting mode ,don't let the light direct into people's eyes, Floodlighting could lead to permanent eye damage.

2). Lamp holder can not be removed, that can avoid damaging lamp holder components and lenses.

3). Lithium batteries belonged to recycling items can not be threw into the fire, please according to standard correctly handle the used batteries

6.maintenance instruction:

The daily routine of flashlight maintenance can maintain long-term service for you.

1) Please use clean soft cloth to wipe the flashlight after each use.

2) When the torch is stained seawater or corrosive liquid, please rinse with water and dry it with hair dryer.

3) When the lamp or end cap is not turned smoothly ,please brush the seam is brushed with some little waterproof silicon grease.

4) When the flashlight don not be used, please push the battery out and put it in the shady place.

5) If the rechargeable battery (18650) is not used for a long time, it should be charged up one time for six months.

7. Warranty:

1) One year warranty (Product is damaged by the product quality problems)

2) The damage caused by misuse, torch surface damage are not in warranty scope.

3) The flashlights dismantled without explicit approval which is damaged is not in warranty scope.